• Piri Keşif Aracı

Arama ipuçları nelerdir?
1.  sayfa ve
1
Correlation among microbial biomass s, soil properties, and other biomass nutrients
Dergi Makalesi

Dergi Makalesi
Kaynak :
Taylor and Francis
Dergi:
Soil Science and Plant Nutrition
Yayıncı:
Informa UK Limited
Yazar(lar) :
Md. Akhter Hossain Chowdhury , Kenji Kouno , Tadao Ando
Yıl :
1999
Md. Akhter Hossain Chowdhury
Yayıncı Web Sitesi
Tam Metin
Kaydet Alıntıla
The soil physicochemical characteristics and amounts of microbial biomass C, N, and S in 19 soils (10 grassland, 2 forest, and 7 arable soils) were investigated to clarify the S status in granitic regosols in Japan, in order to determine the relationships between biomass S and other soil characteristics and to estimate approximately the annual Sand N flux through the microbial biomass. Across the sites, the amount of biomass C ranged from 46 to 1,054, biomass N from 6 to 158, and biomass S from 0.81 to 13.44 mg kg-1 soil with mean values of 438.8, 85.8, and 6.15 mg kg-1 soil, respectively. Microbial biomass Nand S accounted for 3.4–7.7% and 1.1–4.0% of soil total Nand S, respectively. The biomass C: N, C : S, and N : S ratios varied considerably across the sites and ranged from 3.0–10.4, 32.5–87.7, and 5.0–18.8, respectively. Microbial biomass S was linearly related to biomass C and biomass N. The regression accounted for 96.6% for biomass C and 92.9% for biomass N of the variance in the data. The amounts of biomass C, N, and S were positively correlated with a number of soil properties, particularly with the contents of organic C, total N, SO4-S, and electrical conductivity and among themselves. The soil properties, in various linear combinations showed a variability of 84–97% in the biomass nutrients. Stepwise multiple regression indicated that biomass C, N, and S were also dependent on SO4-S as a second factor of significance which could limit microbial growth under the conditions prevailing at the study sites. Annual flux of Nand S was estimated through the biomass using the turnover rates of 0.67 for Nand 0.70 for S to be approximately 129 kg Nand 9.7 kg S ha-1 y-l, respectively, and was almost two times higher in grassland than arable soils.
DOI : 10.1080/00380768.1999.10409333
Anahtar Kelimeler : correlation, microbial biomass N, microbial biomass S, S flux, soil properties
ISSN: 0038-0768
Sayı: 1
Cilt: 45
Sayfa: 175-186
2
Pollution of four river-water surrounding Dhaka city and the effects of heavy metals on the yield and their concentrations in rice and cabbage
Dergi Makalesi

Dergi Makalesi
Open Access
Kaynak :
Directory of Open Access Journals (DOAJ)
Dergi:
Journal of the Bangladesh Agricultural University
Yazar(lar) :
Md. Akhter Hossain Chowdhury , Md. Arifur Rahman , Tanzin Chowdhury , Biplob Kumar Saha , Taslima Sultana
Yıl :
2020
Md. Akhter Hossain Chowdhury
Yayıncı Web Sitesi
Tam Metin
Kaydet Alıntıla
The river-water of Dhaka city is polluting day by day because of increasing level of industrialization, poor water use practice and wastewater management inefficiency. Heavy metals present in river-water are uptaken by food crops when it is used as irrigation purposes which ultimately causing health risks. A pot experiment was conducted to assess the extent of pollution of four rivers water surrounding Dhaka city and to evaluate their effects on the yield and heavy metal concentrations and their uptake by rice and cabbage. Ten water samples of each river viz., Buriganga, Shitalakshya, Turag and Bangshi were collected and analyzed. Crop growth experiment was laid out following completely randomized design with three replicates. The pH, electrical conductivity (EC), total dissolved solids (TDS) and dissolved oxygen (DO) ranged from 5.45 to 7.60, 170 to 1374 (μS cm-1), 451 to 1827 (mg L-1) and 1.8 to 6.5 (mg L-1), respectively. The highest Pb (72.5 mg L-1), Zn (675.8 mg L-1) and Cd (1.08 mg L-1) concentrations were found in Buriganga water whereas the highest Cr concentration (95.2 mg L-1) was found in the water of Turag river. The concentrations of the heavy metals in those rivers were above the permissible limit with the exception of Shitalakshya river-water. In terms of heavy metal pollution, water of four rivers were of the following order: Buriganga > Turag > Bangshi > Shitalakshya. River-water irrigation reduced the yield up to 27% for rice and 38% for cabbage compared to freshwater. The lowest yield of rice and cabbage (3.2 and 25.3 t ha-1, respectively) was found with Buriganga river-water irrigation. The highest Pb (3.72 mg kg−1), Cd (0.08 mg kg−1) and Zn (8.90 mg kg−1) concentrations in rice grain were recorded in the plants grown with Buriganga river-water, whereas the highest Cr concentration (2.34 mg kg−1) was obtained from Turag river-water irrigated rice plant. In cabbage, the highest concentrations of Pb, Cd and Zn were 4.38, 0.012 and 8.86 mg kg−1, respectively recorded from the irrigation of Buriganga river-water, whereas the highest Cr concentration (3.02 mg kg−1) was recorded from Turag river-water irrigation. The overall results suggested that the studied river-water may not be used directly without proper treatment for rice and cabbage production. [J Bangladesh Agril Univ 2020; 18(2.000): 332-339]
DOI : 10.5455/JBAU.81603
Anahtar Kelimeler : rivers, dhaka, cabbage, yield and quality
Cilt: 18
Sayı: 2
Sayfa: 332 - 339
Sınıflandırma :
3
Heavy metals in handloom-dyeing effluents and their biosorption by agricultural byproducts
Dergi Makalesi

Dergi Makalesi
Kaynak :
Springer Link
Dergi:
Environmental Science and Pollution Research
Yazar(lar) :
Kamrun Nahar , Md. Abul Khair Chowdhury , Md. Akhter Hossain Chowdhury , Afzal Rahman , K. M. Mohiuddin
Konu :
Health, Toxicology and Mutagenesis, Pollution, Environmental Chemistry, General Medicine
Yıl :
2018
Md. Akhter Hossain Chowdhury
Yayıncı Web Sitesi
Tam Metin
Kaydet Alıntıla
The Madhabdi municipality in the Narsingdi district of Bangladesh is a well-known area for textile, handloom weaving, and dyeing industries. These textile industries produce a considerable amount of effluents, sewage sludge, and solid waste materials every day that they directly discharge into surrounding water bodies and agricultural fields. This disposal poses a serious threat to the overall epidemic and socio-economic pattern of the locality. This research entailed the collection of 34 handloom-dyeing effluent samples from different handloom-dyeing industries of Madhabdi, which were then analyzed to determine the contents of the heavy metals iron (Fe), zinc (Zn), copper (Cu), chromium (Cr), manganese (Mn), lead (Pb), and cadmium (Cd). Average concentrations of Fe, Cr, Cu, Pb, Mn, and Zn were 3.81, 1.35, 1.70, 0.17, 0.75, and 0.73 mg L−1, respectively, whereas Cd content was below the detectable limit of the atomic adsorption spectrophotometer. The concentrations of Fe, Cr, Cu, Pb, and Mn exceed the industrial effluent discharge standards (IEDS) for inland surface water and irrigation water guideline values. A biosorption experiment of the heavy metals (Fe, Cr, Cu, Mn, and Zn) was conducted without controlling for any experimental parameters (e.g., pH, temperature, or other compounds present in the effluent samples) by using four agricultural wastes or byproducts, namely rice husk, sawdust, lemon peel, and eggshell. Twenty grams of each biosorbent was added to 1 L of effluent samples and stored for 7 days. The biosorption capacity of each biosorbent is ranked as follows: eggshell, sawdust, rice husk, and lemon peel. Furthermore, the biosorption affinity of each metal ion was found in the following order: Cu and Cr (both had similar biosorption affinity), Zn, Fe, Mn. The effluents should not be discharged before treatment, and efficient treatment of effluents is possible with eggshell powder or sawdust at a rate of 20 g of biosorbent per liter of effluents.
DOI : 10.1007/s11356-017-1166-9
Anahtar Kelimeler : Handloom-dyeing, Heavy metal, Pollution load, Biosorption, Agricultural byproducts
ISSN: 0944-1344 1614-7499
Sayı: 8
Cilt: 25
Sayfa: 7954-7967
4
Public perception and health implication of loom-dye effluent irrigation on growth of rice (Oryza sativa L.) and red amaranth (Amaranthus tricolor L.) seedlings
Dergi Makalesi

Dergi Makalesi
Kaynak :
Springer Link
Dergi:
Environmental Science and Pollution Research
Yazar(lar) :
Md. Arifur Rahman , Biplob Kumar Saha , Md. Akhter Hossain Chowdhury , Md. Abul Khair Chowdhury , K. M. Mohiuddin
Konu :
Health, Toxicology and Mutagenesis, Pollution, Environmental Chemistry, General Medicine
Yıl :
2020
Md. Akhter Hossain Chowdhury
Yayıncı Web Sitesi
Tam Metin
Kaydet Alıntıla
Loom-dye effluent discharge has constituted a major environmental threat to the people of Belkuchi Upazila of Sirajganj District. The present study was conducted to characterize loom-dye effluents and investigate their health implications by the growth analysis of rice and red amaranth seedlings along with a survey study among the individuals associated with loom-dyeing, weaving, and crop farming activities. A total of twenty-eight loom-dye effluent samples were collected for physicochemical characterization; among them, only three loom-dye effluents, i.e. pink, violet, and black dyes, at concentrations of 0, 10, 25, 50, 75, and 100% were applied as irrigation water to rice and red amaranth. The plant growth experiment was laid out following a completely randomized design with three replicas. Chemical analyses of loom-dye effluents showed the presence of a significant amount of plant nutrients and heavy metals. The mean concentrations of Pb, Cd, Cr, Fe, Mn, Zn, and Cu were 0.938, 0.046, 0.212, 7.109, 0.609, 0.351, and 0.191 mg L−1, respectively. Among the metals, the concentrations of Pb, Cr, Fe, and Mn were above the recommended limit proposed by the irrigation water guideline value. Application of ≤ 25% pink and violet dye effluent and ≤ 10% black dye effluent had significant (p < 0.05) and positive impacts on growth and yield parameters. Heavy metal content in seedlings increased with increasing effluent application rate and crossed the utmost permissible limit at higher concentration. Survey data discovered a moderate knowledge level among the respondents, which might account for the indiscriminate discharge of loom-dye effluent into the surrounding environment. Attitudes, practices, and protective behaviours of the respondents also reflect the caused for long-term pollution through loom-dye effluents. To reduce its negative effects on the health and crop environment, the loom-dye effluents should not be discharged indiscriminately and used for crop irrigation without proper treatment. Furthermore, training programs ought to be introduced to educate the individuals involved in the discharge and subsequent use of loom-dye effluents.
DOI : 10.1007/s11356-020-08377-0
Anahtar Kelimeler : Dye effluent, Rice, Red amaranth, Public perception, Heavy metal
ISSN: 0944-1344 1614-7499
Sayı: 16
Cilt: 27
Sayfa: 19410-19427
5
Indirect exposure to novel coronavirus (SARS-CoV-2): an overview of current knowledge
Dergi Makalesi

Dergi Makalesi
Open Access
Kaynak :
Directory of Open Access Journals (DOAJ)
Dergi:
Jurnal Teknologi Laboratorium
Yazar(lar) :
Christian Ebere Enyoh , Andrew Wirnkor Verla , Wang Qingyue , Dipak Kumar Yadav , Md Akhter Hossain Chowdhury , Beniah Obinna Isiuku , Tanzin Chowdhury , Francis Chizoruo Ibe , Evelyn Ngozi Verla , Tochukwu Oluwatosin Maduka
Yıl :
2020
Md Akhter Hossain Chowdhury
Yayıncı Web Sitesi
 Piri Tam Metin Bulucu
Kaydet Alıntıla
This review chronicles the indirect transmission method which seems to be overlooked by most people and makes attempts to document the various transmission ways with a hope that such information may strengthen the knowledge base of researchers towards methods of eradicating the pandemic. Current knowledge of transmission and exposure of SARS-CoV-2 has been explained. Various researchers have put forward different ways of exposure and transmission. Literature does not reveal whether the indirect transmission route is the dominant one. However, total lockdown could be a veritable means to reduce both direct and indirect transmission routes. In many countries where the indirect transmission has been reduced, the scourge of the virus is less. The work creates awareness on the need to watch out for those routes of transmissions that may not be popular and suggested vital knowledge gaps that need to fill.
DOI : 10.29238/teknolabjournal.v9i1.227
Anahtar Kelimeler : air pollution, covid-19, transmission, wastewater, article review
Cilt: 9
Sayı: 1
Sayfa: 67 - 77
6
“Plasti-remediation”: Advances in the potential use of environmental plastics for pollutant removal
Dergi Makalesi

Dergi Makalesi
Kaynak :
Science Direct
Dergi:
Environmental Technology & Innovation
Yayıncı:
Elsevier BV
Yazar(lar) :
Christian Ebere Enyoh , Franklyn Okechukwu Ohiagu , Andrew Wirnkor Verla , Qingyue Wang , Leila Shafea , Evelyn Ngozi Verla , Beniah Obinna Isiuku , Tanzin Chowdhury , Francis Chizoruo Ibe , Md. Akhter Hossain Chowdhury
Yıl :
2021
Md. Akhter Hossain Chowdhury
Yayıncı Web Sitesi
Tam Metin
Kaydet Alıntıla
Plastic wastes are introduced into the environment inevitably and their exposure in the environment causes deterioration in its mechanical and physicochemical properties. This leads to the formation of plastic fragments, which are considered as micro and nano plastics when their size is <5 mm and < 10 nm. In recent years, plastic pollution has been reported in all kinds of environments worldwide and is considered a threat to the health of the ecosystem and humans. Besides, plastics serve as vectors for pollutants as they are capable of adsorbing and accumulating pollutants from seawater. However, this particular ability exposes the tendency of exploiting plastic waste as an adsorbent for removing pollutants from polluted water. Considering the problems caused by plastic waste to ecosystems, this concept is very interesting and attractive as a way to protect the environment by recycling or reusing plastic wastes as novel low-cost adsorbents. Meanwhile, studies have begun to exploit and understand the concept of using plastic waste as an adsorbent to remove diverse pollutants such as heavy and radioactive metals, persistent organic pollutants, dyes and oils from aqueous solutions as well as gases e.g volatile organic compounds (VOCs), carbon dioxide (CO2) and hydrogen (H 2). This paper, therefore, provides an overview of studies, highlighting the process of adsorbent preparation, plastic/pollutant interaction mechanisms (including kinetic and isotherm models), and factors influencing the removal rates and desorption of pollutants and reusability of the plastic-based adsorbent. Diverse pollutants such as heavy and radioactive metals, persistent organic pollutants, dyes and oils from aqueous solutions as well as gases e.g volatile organic compounds (VOCs), carbon dioxide (CO2) and hydrogen (H 2) have been removed by plastic based adsorbent with the modified ones showing higher removal capacity. Desorption and reusability studies have shown that the plastic-based adsorbent is re-generable and stable for dyes and heavy metals (e.g. Pb 2+) with high desorption rate (> 80 %) while for low (< 40 %) for phenathrene. Applying plastic waste is a novel potential way of pollutant removal from the environment and therefore a facile sustainable approach. However, the optimization of the method considering the factors affecting the removal rate as well as characterizing the plastic absorbents before and after pollutant adsorption should be conducted. This will help in understanding the possibility of using this concept for field applications.
DOI : 10.1016/j.eti.2021.101791
Anahtar Kelimeler : PPCPs Pharmaceuticals and personal care products, Pharmaceuticals and personal care products, CO2 Carbon dioxide, Carbon dioxide, MPs Micro plastics, Micro plastics, NPs Nano plastics, Nano plastics, ROS Reactive oxygen species, Reactive oxygen species, VOCs Volatile organic compounds, Volatile organic compounds, PAHs Polycyclic aromatic hydrocarbons, Polycyclic aromatic hydrocarbons, PCBs Polychlorinated biphenyls, Polychlorinated biphenyls, DDT Dichlorodiphenyltrichloroethane, Dichlorodiphenyltrichloroethane, PVC Polyvinyl chloride, Polyvinyl chloride, PS Polystyrene, Polystyrene, CIP Ciprofloxacin, Ciprofloxacin, OTC Oxytetracycline, Oxytetracycline, PE Polyethylene, Polyethylene, PP Polypropylene, Polypropylene, PA Polyamide, Polyamide, CMP Conjugated microporous polymer, Conjugated microporous polymer, E2 17 β-Estradiol, 17 β-Estradiol, FTIR Fourier Transform infrared spectroscopy, Fourier Transform infrared spectroscopy, XRD X-ray diffraction, X-ray diffraction, TGA Thermogravimetric analysis, Thermogravimetric analysis, SEM Scanning electron microscopy, Scanning electron microscopy, pHpzc Point of zero charge, Point of zero charge, PET Polyethylene terephthalate, Polyethylene terephthalate, TYL Tylosin, Tylosin, DCM Dichloromethane, Dichloromethane, DMM Dimethoxymethane, Dimethoxymethane, IDA Iminodiacetic acid, Iminodiacetic acid, HMDA 1, 6-diaminohexane, 1, 6-diaminohexane, MPA Methylpropenoic acid, Methylpropenoic acid, AN Acrylonitrile, Acrylonitrile, DMF Dimethylformamide, Dimethylformamide, DG Degree of grafting, Degree of grafting, LLDPE Linear low density polyethylene, Linear low density polyethylene, OMMT Organo-montmorillonite, Organo-montmorillonite, THF Tetrahydrofuran, Tetrahydrofuran, Cr Chromium, Chromium, Co Cobalt, Cobalt, Ni Nickel, Nickel, Cu Copper, Copper, Zn Zinc, Zinc, Cd Cadmium, Cadmium, Pb Lead, Lead, Fe Iron, Iron, Al Aluminum, Aluminum, Mn Manganese, Manganese, Mg Magnesium, Magnesium, Br Bromine, Bromine, Si Silicon, Silicon, As Arsenic, Arsenic, Hg Mercury, Mercury, Sr Strontium, Strontium, HNO3 Nitric acid, Nitric acid, ZnCl2 Zinc chloride, Zinc chloride, FeCl3 Iron (III) chloride, Iron (III) chloride, ICP-MS inductively coupled plasma-mass spectrometer, inductively coupled plasma-mass spectrometer, HDPE High-density polyethylene, High-density polyethylene, LDPE Low-density polyethylene, Low-density polyethylene, PBAT Poly-butylene adipate coterephtalate, Poly-butylene adipate coterephtalate, PUR Polyurethane, Polyurethane, ICP-OES Inductively coupled plasma-optical emission spectrometry, Inductively coupled plasma-optical emission spectrometry, FAAS Flame atomic absorption spectrometry, Flame atomic absorption spectrometry, FP-XRF Field-portable X-ray fluorescence, Field-portable X-ray fluorescence, AAS Atomic absorption spectroscopy, Atomic absorption spectroscopy, GMA Glycidyl methacrylate, Glycidyl methacrylate, PPw-g-AO Amidoxime functionalized PP adsorbent, Amidoxime functionalized PP adsorbent, LDPE-g-PAA-Co-Starch/OMMT Hydrogel composite consisting of waste linear low density polyethylene, Hydrogel composite consisting of waste linear low density polyethylene, PE-g-PSSA Crosslinked polyethylene-graft-polystyrene sulfonic acid, Crosslinked polyethylene-graft-polystyrene sulfonic acid, ATPC Activated PET with adsorbent carrot and tomato, Activated PET with adsorbent carrot and tomato, PET-g-2-HPMA PET grafted with 2-hydroxypropyl methacrylate in presence of benzene peroxide, PET grafted with 2-hydroxypropyl methacrylate in presence of benzene peroxide, GMA-g-PET Glycidyl methacrylate-g-poly(ethylene terephthalate) fibers, Glycidyl methacrylate-g-poly(ethylene terephthalate) fibers, HMDA-GMA-g-PET Glycidyl methacrylate-g-poly(ethylene terephthalate) fibers bonded with 1, 6-diaminohexane, Glycidyl methacrylate-g-poly(ethylene terephthalate) fibers bonded with 1, 6-diaminohexane, PAA Polyacrylic acid, Polyacrylic acid, PVDF Polyvinylidene fluoride, Polyvinylidene fluoride, EVA Ethylene vinyl acetate, Ethylene vinyl acetate, XPS X-ray photoelectron spectroscopy, X-ray photoelectron spectroscopy, GCMS Gas chromatography u2013 mass spectrometry, Gas chromatography u2013 mass spectrometry, HCHs Hexachlorocyclohexanes, Hexachlorocyclohexanes, PBDEs Polybrominated diphenyl ethers, Polybrominated diphenyl ethers, BPA Bisphenol A, Bisphenol A, OPs Octaphenols, Octaphenols, PFASs polyfluoroalkyl substances, polyfluoroalkyl substances, COOH Carboxylic acid, Carboxylic acid, PS-COOH Carboxylated Polystyrene particles, Carboxylated Polystyrene particles, CBZ Carbamazepine, Carbamazepine, 4MBC 4-methylbenzylidene camphor, 4-methylbenzylidene camphor, TCS Triclosan, Triclosan, EE2 17a-ethinyl estradiol, 17a-ethinyl estradiol, cGCu2013ECD-MD Capillary gas chromatograph equipped with electron capture detector and mass detector, Capillary gas chromatograph equipped with electron capture detector and mass detector, GCu2013ECD Gas chromatograph equipped with electron capture detector, Gas chromatograph equipped with electron capture detector, LSC Liquid scintillation counting, Liquid scintillation counting, GC-ITMS Gas chromatographyu2013ion-trap mass spectrometers, Gas chromatographyu2013ion-trap mass spectrometers, QqLIT-MS/MS Liquid chromatography system coupled to a quadrupole linear ion-trap tandem mass spectrometer, Liquid chromatography system coupled to a quadrupole linear ion-trap tandem mass spectrometer, HPLC High performance liquid chromatography, High performance liquid chromatography, SDZ Sulfadiazene, Sulfadiazene, AMX Amoxicillin, Amoxicillin, TC Tetracycline, Tetracycline, TMP Trimethoprim, Trimethoprim, PP-g-MAA Methacrylic acid-grafted PP fibers, Methacrylic acid-grafted PP fibers, S3 Non-woven PP fibers mats, Non-woven PP fibers mats, HD-75 Polymer film of HDPE (7.5%) + ultra-high molecular weight PE, Polymer film of HDPE (7.5%) + ultra-high molecular weight PE, UHMWPE Ultra-high molecular weight PE, Ultra-high molecular weight PE, DVB Divinylbenze, Divinylbenze, CR Congo red, Congo red, MB Methylene blue, Methylene blue, AB25 Acid blue 25, Acid blue 25, MG Malachite green, Malachite green, RB Rhodamine B, Rhodamine B, DB71 Blue dye 71, Blue dye 71, PPC Polyypyrrole polymer composite, Polyypyrrole polymer composite, MPA/AN-g-PET 2-methylpropenoic acid (MPA) and acrylonitrile (AN), 2-methylpropenoic acid (MPA) and acrylonitrile (AN), IDA-GMA-g-PET Glycidyl methacrylate-g-poly(ethylene terephthalate) fibers with iminodiacetic acid, Glycidyl methacrylate-g-poly(ethylene terephthalate) fibers with iminodiacetic acid, SCMP Sulphonic-group carrying resin, Sulphonic-group carrying resin, LODs Carbon-metal double layered oxides, Carbon-metal double layered oxides, MPA/AN-g-PET 2-methylpropenoic acid and acrylonitrile onto poly (ethylene terephthalate) fibers, 2-methylpropenoic acid and acrylonitrile onto poly (ethylene terephthalate) fibers, HMDA-GMA-g-PET Glycidyl methacrylate-g-poly(ethylene terephthalate) fibers bonded with 1, 6-diaminohexane, Glycidyl methacrylate-g-poly(ethylene terephthalate) fibers bonded with 1, 6-diaminohexane, CDs Compact disks, Compact disks, DVDs Digital video disks, Digital video disks, AC-PPy Polypyrrole, Polypyrrole, AC-PVDF Polyvinylidene fluoride, Polyvinylidene fluoride, AC-SDVB Sulfonated styrene-divinylbenzene resin, Sulfonated styrene-divinylbenzene resin, OMP-PF Phenolu2013formaldehyde resin, Phenolu2013formaldehyde resin, POPs Persistent organic pollutants, Persistent organic pollutants, DDE Dichlorodiphenyldichloroethylene, Dichlorodiphenyldichloroethylene, FOSA Perfluorooctanesulfonamide, Perfluorooctanesulfonamide, PFOS Perfluorooctanesulfonate, Perfluorooctanesulfonate, EDA Electron-Donoru2013Acceptor, Electron-Donoru2013Acceptor, EMT External mass transfer, External mass transfer, PFO Pseudo-first-order, Pseudo-first-order, PSO Pseudo-second-order, Pseudo-second-order, PVSDM Pore-volume and surface diffusion model, Pore-volume and surface diffusion model, FPMT Film-pore mass transfer, Film-pore mass transfer, pp-LFERs Poly-parameter linear free energy relationship, Poly-parameter linear free energy relationship, D-R Dubinin-Radushkevich, Dubinin-Radushkevich, PVDM Pore volume diffusion, Pore volume diffusion, SDM Surface diffusion, Surface diffusion, IMT Internal mass transfer, Internal mass transfer, FPMT Film pore mass transfer, Film pore mass transfer, LDF Linear driving force, Linear driving force, PDM Polanyiu2013Dubininu2013Manes, Polanyiu2013Dubininu2013Manes, PCB77 3, 3u2019, 4, 4u2019-tetrachlorobiphenyl, 3, 3u2019, 4, 4u2019-tetrachlorobiphenyl, KOH Potassium hydroxide, Potassium hydroxide, Adsorbent, Interaction mechanisms, Novel methods Plastic waste, Polymers, Water treatment
ISSN: 2352-1864
Cilt: 23
Sayfa: 101791

Yayın Yılı

Sınırla

Doküman Türü
Tümü

Veri Tabanı
Tümü

Dergi İsmi
Tümü

Disiplin
Tümü

Disipline Göre İlgililik

Alt Disiplin
Tümü

Konu
Tümü

Yayıncı
Tümü

Lisan
Tümü

X
Filtreler